Idealec Bus Bars: ID Drive
Applications
Power distribution and interconnection for electronic command and regulation systems such as variable speed drives, generators, power supplies, industrial inverters, batteries and energy accumulators, etc.
Description
Co-laminated structure (cross-section)
Specifications
| Voltage (AC/DC) | 1500V max. |
| Power | 1000A max. |
| Temperature range | -40°C to +95°C |
| Relative humidity | 85% max. |
| Electrical conductor | Copper, copper alloys and aluminium |
| Insulation | Polyester dielectric film |
| Support and shielding | Steel, stainless steel, galvanised steel, aluminium |
| Electrical tests applicable to qualification | High pot test (<5000V), insulation resistance at 500V, partial discharge test, capacitance, DC/AC resistance, inductance |
| Electrical tests applicable in production | High pot test (<5000V), partial discharge test at 1.5 Vn/1.1 Vn |
| Applicable certifications | RoHS, UL94, UL1776... |
Connections
| Fastened threaded stud |  | Fastened screw |  |
| Fastened threaded insert |  | Connection hardware with captive screw |  |
| Welded Fast-on® tab |  | Flexible power supply terminal |  |
| Fastened floating spacer |  | Welded power supply terminal |  |
| Fastened fixed spacer |  | Reinforced electrical insulation on the connection terminal |  |
| Integrated flexible connector, flat or stamped |  | Connection hardware for CMS soldering |  |
| Integrated connection |  |
Components compatible with Idealec Bus Bars
| Circuit-breaker | Resistor | Cable |
| Protection fuse | Battery or accumulator | Printed circuit |
| Capacitator | IGBT,GTO | Heat exchanger |
| Inductance | Diode | Current sensor |
| Temparture probe | Shunt | Contactor |